GE MEDICAL SYSTEMS - KRETZTECHNIK RAFT VOLUSON® 730PRO / 730PROV (BT´04)
D
IRECTION KTI105947, REVISION 2 SERVICE MANUAL
7-10 Section 7-5 - How to use the Auto Tester program
Section 7-5 How to use the Auto Tester program (cont’d)
The following screen will appear.
10.)Insert an empty DVD/CD+(R)W in the Drive and select the “DVD/CD Burn” icon.
11.)Enter a Filename.
12.)After clicking OK
, the following message boxes will appear.
13.)After the DVD/CD write is finished click the OK
button and close the “Auto Tester” program.
Figure 7-9 Auto Tester Finished
Figure 7-10 Enter a Filename
Figure 7-11 CD Burn Process
“DVD/CD Burn”
icon
To Next Page
Loading...
