5-1
Chapter 5: ARMS (Advanced
Registration Mark Sensing
System)
ARMS (Advanced Registration Mark Sensing System) is a function to
scan the registration mark written on the media using sensors.
Tilt of the axes and distance can be adjusted with 2POINTS or 3
POINTS. 2 axes warp adjustment can be adjusted in addition to axes
adjustment (tilt) and distance adjustment with 4POINTS.
It makes possible for a precise cutting when cutting the borders of
the images plotted by different plotter, or to cut the media again, by
adjusting the print position by ARMS.
It is possible to perform a multiple registration mark adjustment or
segment area adjustment by linking with the application software on the
computer. See the operation guides of the application software about
the registration mark adjustment function linked with the application
software.
This chapter describes the outline of the ARMS (Advanced Registration
Mark Sensing System) and how to setup and use the ARMS on the
control panel.
To Next Page
Loading...
