GRAPHTEC FC8000 Series - Related to HP-GL Command; Model ID Response (MODEL EMULATED)

11-8
11-9
Related to HP-GL Command
These items are valid only when the HP-GL command is enabled in the COMMAND.
Model ID Response (MODEL EMULATED)
This function set the operation upon receipt of the "OI" command requesting for the model ID. The reply will be
7550 when set to 7550, and 7586 when set to 7586.
Operation
1
Press the [MENU] key in the default screen.
MENU screen is displayed.
2
Press the POSITION (
▲
) key (I/F).
POSITION
INTERFACE setting screen (1/3) is displayed.
3
Press the [3] key (MODEL EMULATED).
HP-GL MODEL EMULATED setting screen is displayed.
4
Press the [1] key (7550) or the [2] key (7586).
5
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to INTERFACE setting screen (1/3).
6
Press the [MENU] key.
It will return to the default screen.