GRAPHTEC FC8000 Series - Enabling;Disabling the Media Sensors (MEDIA SENSOR)

10-4
10-5
Related to Sensor
Enabling/Disabling the Media Sensors (MEDIA SENSOR)
This function enables or disables the media sensors that detect the size of the medium in the feed direction.
Operation
1
Press the [MENU] key in the default screen.
MENU screen is displayed.
2
Press the POSITION (
▼
) key (ADV.).
POSITION
ADVANCE setting screen (1/3) is displayed.
3
Press the [4] key (MEDIA SENSOR).
MEDIA SENSOR setting screen is displayed.
Supplement
Cross cut will not be available when set to
"DISABLED". Set the "AREA".
4
Press the [2] key (DISABLED) or the [1] key (ENABLED).
5
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to ADVANCE setting screen (1/3).
6
Press the [MENU] key.
It will return to the default screen.