13-14 13-15
Caution Message
Symptom LCD Display Description
W06001 Cross cut function cannot be used for sheet media.
W06002 Cross cut function cannot be used because the media is loaded from
the front.
W06003 Cross cut function cannot be used until the media size is detected.
W06004 Cross cut function cannot be used when the push roller sensor is
disabled.
W06005 Cross cut function cannot be used when the media sensor is disabled.
W06007 CONDITION No. that has selected pouncing tool as the tool number
setting can only set TOOL 1.
To Next Page
Loading...
