GRAPHTEC FC8000 Series - When DHCP Setting Is Turned off

9-4
9-5
Supplement
Setting of the DHCP depends on the structure
of the network equipment and the environment.
For description, refer to the manual of
the equipment, check with the network
administrator.
It will return to LAN setting screen without
changing the settings when you press the
POSITION (
◄
) key (PREVIOUS).
l
l
5
Press the [1] key (DHCP).
DHCP setting screen is displayed.
* What is displayed varies depending on the network environment.
Supplement
DHCP is set on in the initial setting.
When the DHCP setting is set to [OFF], see
"When DHCP Setting is Turned Off"
P.9-4
.
l
l
6
Press the [1] key (on) or the [2] key (off).
7
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to INTERFACE setting screen (2/3).
8
Press the [MENU] key.
It will return to default screen.
When DHCP Setting is Turned Off
Network is set manually.
Next page
Operation
1
Press the [2] key (off) in the DHCP setting screen.
LAN setting screen is displayed.
2
Press the [2] key (IP).
IP ADDRESS setting screen is displayed.
3
Press the POSITION (
◄►
) key, and select the value to be set.
POSITION
Supplement
Digits of settings can be changed by pressing
the [FAST] key.
4
Press the POSITION (
▲▼
) key, and increase or decrease the
values in the digits to be set.
POSITION