3-12 3-13
Stop Cutting
1
Press the [STOP] key.
Operation will stop and following screen is displayed.
Supplement
It will resume cutting by pressing [1]
(CONTINUE) key.
See "Pause and Resume Cutting"
P.3-12
.
l
l
2
Press the [2] key (QUIT JOB).
Following screen is displayed.
Supplement
It will return to operation stop screen without
clearing buffer memory when [2] key (CANCEL) is
pressed.
3
Press the [1] key (CLEAR).
Following screen is displayed, the buffer memory is cleared, and
it will return to default screen.
To Next Page
Loading...
