GRAPHTEC FC8000 Series - 2-3 Loading Media (Paper or Marking Film)

2-6
2
-
2-7
Both roll media and sheet media can be used with the FC8000. Load the media according to the
instructions given for each type.
P.2-6
Loading Roll Media (Rear Loading)
P.2-9
Loading Roll Media (Front Loading)
P.2-11
Loading Sheet Media
Loading Roll Media (Rear Loading "REAR SET")
Next page
Operation
1
Lower the media set lever to raise the push rollers.
Push roller
Media sensor
Media set lever
2
Place the media roll on the roll media stocker. Load the media in
the plotter as shown. Pass the leading edge from the back of the
plotter so it emerges from the front.
3
Loading Media (Paper or Marking
Film)