GRAPHTEC FC8000 Series - Related to Plotter Environment; Fan Suction Setting (FAN POWER)

10-6
10-7
Related to Plotter Environment
Fan Suction Setting (FAN POWER)
This function sets the suction force used to affix media to the plotter.
It may not feed properly if the media is thin, so decrease the suction force.
Operation
1
Press the [MENU] key in the default screen.
MENU screen is displayed.
2
Press the POSITION (
▼
) key (ADV.).
POSITION
ADVANCE setting screen (1/3) is displayed.
3
Press the POSITION (
▼
) key.
POSITION
ADVANCE setting screen (2/3) is displayed.
4
Press the [2] key (FAN POWER).
FAN POWER setting screen is displayed.
5
Press the [2] key (WEAK) or the [1] key (NORMAL).
6
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to ADVANCE setting screen (2/3).
7
Press the [MENU] key.
It will return to the default screen.