GRAPHTEC FC8000 Series - 3-2 Move the Tool Carriage and Media

3-2
3
-
3-3
Move the Tool Carriage and Media
Tool carriage and media can be moved manually using the POSITION key.
It also can move the tool carriage and media to the origin, or move it certain distance to keep it away.
Continuously Move Manually
It can manually move continuously when the screen is displaying "READY", or when the POSITION (
▲▼◄►
)
key is displayed.
Operation
Supplement
Tool carriage will move faster when [FAST] key is
pressed simultaneously with POSITION key.
1
Continuously press the POSITION (
▲▼◄►
) key.
POSITION
Tool carriage or the media will keep on moving toward the
direction of the pressed POSITION key.
2
Release the POSITION (
▲▼◄►
) key.
Movement of the tool carriage or the media will stop.
Move in Steps Manually
It can manually move in steps when the screen is displaying "READY", or when the POSITION (
▲▼◄►
) key is
displayed.
Operation
Supplement
It will move in steps every time POSITION (
▲▼
◄►
) key is pressed.
Distance of step movement can be changed.
See "Setting of Step Movement Distance"
P.3-4
.
l
l
1
Press the POSITION (
▲▼◄►
) key once.
POSITION
Tool carriage or the media will move toward the direction of the
pressed POSITION key for 1 step.
2