GRAPHTEC FC8000 Series - Moving the Pen While Raised or Lowered in Response to the W Command (COMMAND W)

11-6
11-7
Moving the Pen While Raised or Lowered in Response to the "W" Command
(COMMAND "W")
This function set the operation upon receipt of the "W" command for the drawing of arcs.
The pen will move to the specified starting position in the raised status when it is set to TOOL UP, regardless of
the pen’s conditions. The pen will move without changing its condition, to the specified starting position in the
lowered status when it is set to TOOL DOWN.
Operation
1
Press the [MENU] key in the default screen.
MENU screen is displayed.
2
Press the POSITION (
▲
) key (I/F).
POSITION
INTERFACE setting screen (1/3) is displayed.
3
Press the POSITION (
▼
) key.
POSITION
INTERFACE setting screen (2/3) is displayed.
4
Press the [4] key (COMMAND "W").
COMMAND "W" setting screen is displayed.
5
Press the [1] key (TOOL DOWN) or the [2] key (TOOL UP).
6
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to INTERFACE setting screen (2/3).
7
Press the [MENU] key.
It will return to the default screen.