GRAPHTEC FC8000 Series - Setting User Priority

4-12 4-13
Setting User Priority
Operation
1
Press the [1] key (SELECT USER) in the default screen.
USER screen is displayed.
Supplement
Settings only from key input are accepted in
"KEYPAD" setting. Settings from the controller
are not accepted. LED for USER1 or 2 will flash.
"KEYPAD/BY PC" setting can be set from key
input and controller. LED for USER1 or 2 will be
lit.
l
l
2
Press the [2] key (USER PRIORITY).
USER PRIORITY screen is displayed.
Supplement
It will return to USER screen without changing the
settings when you press the POSITION (
◄
) key
(PREVIOUS).
3
Press the [1] key (KEYPAD) or the [2] key (KEYPAD/BY PC).
USER PRIORITY is selected and it will return to USER screen.
Supplement
It will return to default screen without changing the
settings when you press the POSITION (
◄
) key
(CANCEL).
4
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to default screen.