GRAPHTEC FC8000 Series - 1-1 Checking the Contents

1-2
1
-
1-3
1
Checking the Contents
Check that all of the standard accessories shown below are present. If any accessory is missing, contact
your sales representative or the nearest Graphtec dealer.
AC power cord
1
USB cable (3-meter length)
1
User Guide CD-ROM
1
• User's Manual (pdf)
• Windows driver/Macintosh plug-in software
Setup Manual, TO ENSURE SAFE AND CORRECT USE
1 of each
Cutter blades (CB09UA-1)
1
Water-based fibertip pen
1
Cutter holder (PHP32-CB09N)
1
Media bracket
1
• Media stocker x 2
• Stock roller x 2
• M4 binding head screws x 4
Stand
1
• Base assembly x 2
• Stand side bar x 2
• Center bar x 1
• Socket head cap screws (M5) x 20
• Allen wrench (for M5) x 1
Cloth basket
1
• Cloth basket
• Mounts x 2
• Basket tubes (short) x 4
• Basket tubes (long) x 3
• Socket head cap screws (M5) x 4
• Joints x 4