GRAPHTEC FC8000 Series - Attaching to the Pen Station

14-8
14-9
3
Make sure that the tool bracket is engaged on the tool's flange,
and then tighten the screw.
Flange
Bracket to
hold tool
Attaching to the Pen Station
Open the pen-hold mechanism on the pen station, and then attach the plotting pen.
Operation
1
Easily pull the bracket on the pen station forward and attach the
plotting pen.
CAUTION
Do not leave the plotter pens mounted on the
pen station for long period. Pen tips will dry out,
making it unusable. Take the pens off from the
pen station and place the caps to store.
Only the plotting pens can be mounted on the
pen station. Do not mount the cutter pens.
l
l
2
Make sure that the bracket of the pen station is engaged in the
upper groove of the pen.