GRAPHTEC FC8000 Series - Page 130

5-28
5-29
11
Press the POSITION (
▲▼
) key and increase or decrease the
setting value. Set the X value measured in step 9.
POSITION
12
Confirm the setting and press the POSITION (
◄
) key
(PREVIOUS).
POSITION
SENSOR OFFSET ADJ. is selected and it will return to SENSOR
OFFSET ADJ. screen.
13
Press the [4] key (Y).
SENSOR OFFSET ADJ. Y screen is displayed.
14
Press the POSITION (
▲▼
) key and increase or decrease the
setting value. Set the Y value measured in step 9.
POSITION
15
Confirm the setting and press the POSITION (
◄
) key
(PREVIOUS).
POSITION
SENSOR OFFSET is selected and it will return to SENSOR
OFFSET ADJ. screen.
Supplement
It will return to ARMS setting screen (3/4)
without changing the setting when you press the
POSITION (
◄
) key (CANCEL).
16
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to ARMS setting screen (3/4).
17
Press the [MENU] key.
It will return to the default screen.