Next page
6
Press the POSITION (
▲
) key.
ARMS SETTING screen (4/4) is displayed.
7
Press the [1] key (AXIS ALIGNMENT TOOL).
AXIS ALIGNMENT TOOL selection screen is displayed.
8
Press the [1] key (LOUPE) or the [2] key (LIGHT POINTER)
depending on the toll set in step 2.
9
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to ARMS setting screen (4/4).
10
Press the POSITION (
▼
) key.
ARMS setting screen (1/4) is displayed.
11
Press the [3] key (MARK SCAN MODE).
MARK SCAN MODE screen is displayed.
12
Press the [1] key (MARK SCAN MODE).
MARK SCAN MODE setting screen is displayed.
Supplement
It will return to MARK SCAN MODE screen
without changing the settings when you press the
POSITION (
◄
) key (PREVIOUS).
13
Press the [3] key (AXIS ALIGNMENT).
AXIS ALIGNMENT mode is selected and it will return to MARK
SCAN MODE screen.
To Next Page
Loading...
