13-16 13-17
Supplement
It will return to TEST menu screen without printing
the list when [3] key (CANCEL CONDITION) is
pressed.
6
Press the [1] key (DONE 1/2) or the [2] key (DONE 2/2).
Message to confirm tool position is displayed.
7
Move the tool carriage to print start position by pressing the
POSITION (
▲▼◄►
) key.
CAUTION
Do not place you hand around the moving areas.
The tool carriage will start moving, so there is a
chance of injury.
8
Confirm that movable parts of the tool and media can safely
operate and press the [ENTER] key.
Selected page of the CONDITION LIST is printed.
9
It will return to READY status when the printing is completed.
Supplement
Set the media and repeat steps 6 to 8 to print
different page at this point.
10
Press the [MENU] key.
It will return to READY status when the printing is completed.
To Next Page
Loading...
