GRAPHTEC FC8000 Series - Page 262

15-8
15
-
15-9
4
Supplies
Item Model Contents
Cutter plunger PHP32-CB09N-HS Used with
Ф
0.9 mm diameter cutter blades
(CB09UA-5)
PHP32-CB15N-HS Used with
Ф
1.5 mm diameter cutter blades,
has a built-in spring
PHP31-CB09-HS Used with
Ф
0.9 mm diameter cutter blades
(CB09UA-5)
PHP31-CB15-HS Used with
Ф
1.5 mm diameter cutter blades,
comes with one tube of grease
PHP31-CB15B-HS Used with
Ф
1.5 mm diameter cutter blades
(CB15U-5SP, CB15U-K30-5SP, CB15U-K20-
2SP)
Cutter blade CB09UA-5
Ф
0.9 mm diameter, supersteel blade, comes
with a spring, for cutting general film (set of 5)
CB15U-5
Ф
1.5 mm diameter, supersteel blade, for
cutting slightly thick film (set of 5)
CB15U-5SP
Ф
1.5 mm diameter, supersteel blade, comes
with a spring (set of 5)
CB15UA-2
Ф
1.5 mm diameter, supersteel blade, for
cutting high-intensity reflective film (set of 2)
CB15U-K30-5
Ф
1.5 mm diameter, supersteel blade, for
cutting thick materials (set of 5)
CB15U-K30-5SP
Ф
1.5 mm diameter, supersteel blade, comes
with a spring (set of 5)
CB15UA-K30-2
Ф
1.5 mm diameter, supersteel blade, for
cutting high-intensity reflective film (set of 2)
CB15UB-2
Ф
1.5 mm diameter, supersteel blade, for
cutting small text (set of 2)
CB15U-K20-2SP For cutting sandblast rubber (set of 2)
Water-based fibertip pen KF550 Series
Oil-based ballpoint pen KB130, 140 Series
Oil-based ballpoint pen
plunger
PHP31/32/33-BALL
Disposable ink pen (black) SD Series 0.2 to 0.5 mm
diameter
Ink pen plunger PHP32/33/34-INK
Cross cut blade CT01H
CT02U Ultra-hard blade