GRAPHTEC FC8000 Series - Page 90

4-6
4-7
Operation
1
Press the [MENU] key.
MENU screen is displayed.
2
Press the [3] key (AREA).
AREA PARAMETERS setting screen (1/2) is displayed.
3
Press the [4] key (MIRROR).
MIRROR setting screen is displayed.
Supplement
Press the [2] key (OFF) to turn off the mirror.
4
Press the [1] key (ON).
Supplement
It will return to AREA parameter screen (1/2)
without changing the settings when you press the
POSITION (
◄
) key (CANCEL).
5
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to AREA parameter screen (1/2).
6
Press the [MENU] key.
It will return to default screen.