Hakko Electronics Monitouch V9 Series - Page 148

4.2 Temperature Controller/Servo/Inverter Connection 4-17
Indirect Device Memory Designation
 When the address (group ID) is 0 to FFH:
* In the expansion code, specify the sub-station number, and set which word, higher or lower, is to be read when a
2-word address is specified (expansion bit designation).
 When the address (group ID) is 100 to FFFH:
*1 Set the address (group ID + item ID) for “n + 1” and “n + 2”.
*2 In the expansion code, specify the sub-station number, and set which word, higher or lower, is to be read when a
2-word address is specified (expansion bit designation).
15 8 7 0
n + 0 Model Device type
n + 1 Group ID Item ID
n + 2
Expansion code
*
Bit designation
n + 3 00 Station number
15 8 7 4 3 0
n + 0 Model Device type
n + 1
Group ID (medium/lower)
*1
Item ID
*1
n + 2 000
Group ID
(higher)
*1
n + 3
Expansion code
*2
Bit designation
n + 4 00 Station number
15 8
000
Sub-station number:
0 to FH
Expansion bit designation
0: 0 to 15 bits
1: 16 to 31 bits
bbbcc
Item ID: 0 to FFH
Group ID (lower): 0 to FH
Group ID (medium): 0 to FH
Group ID (higher): 0 to FH
Group ID (higher)
0 to FH
1514131211109876543210
Group ID (medium)
0 to FH
Group ID (lower)
0 to FH
Item ID
0 to FFH
n + 2
n + 1
15 14 13 12 11 10 9 8 7 6
5
43210
Not used
Fixed to 000H
15 8
000
Sub-station number:
0 to FH
Expansion bit designation
0: 0 to 15 bits
1: 16 to 31 bits