Hakko Electronics Monitouch V9 Series - Page 295

16-42 16. Fuji Electric
PLC_CTL
*1 Not available with F*JF-R.
*2 Available only with F-MPC60B.
*3 Available only with FePSU.
*4 Select station No. 0 for broadcast commands.
*5 Can be set only for a broadcast command.
*6 Available only with F*JF-R.
Content F0 F1 (=$u n) F2
kWh integrated value reset
*1
1 - 8
(PLC1 - 8)
nStation number
2
n + 1 Command: 0
Max. kW (amount of power) reset
1 - 8
(PLC1 - 8)
nStation number
2
n + 1 Command: 1
Operation control
*2
1 - 8
(PLC1 - 8)
nStation number
3
n + 1 Command: 2
n + 2
0: Turning ON the input/output
1: Turning ON the output of Power OFF
2: Turning OFF the output of power
ON/OFF
Reset all of the demand maximum values
*3
1 - 8
(PLC1 - 8)
nStation number
2
n + 1 Command: 3
Alarm reset
*3
1 - 8
(PLC1 - 8)
nStation number
2
n + 1 Command: 4
Time setting
*3
1 - 8
(PLC1 - 8)
n
Station number
*4
8
(9 when
broadcast is
specified)
n + 1 Command: 5
n + 2
0: Specific station number
1: Broadcast
n + 3 Year
n + 4 Month
n + 5 Day
n + 6 Hour
n + 7 Minute
n + 8
Second
*5
Reset the maximum and minimum voltage
values
*6
1 - 8
(PLC1 - 8)
nStation number
2
n + 1 Command: 6
Entering test mode
*6
1 - 8
(PLC1 - 8)
n
Station number
*4
3
n + 1 Command: 7
n + 2
0: Specific station number
1: Broadcast
Exiting test mode
*6
1 - 8
(PLC1 - 8)
n
Station number
*4
3
n + 1 Command: 8
n + 2
0: Specific station number
1: Broadcast