7-19
pH, mV & ISE MODE
7.3 ISE Mode
7.3.1 Display
The
ISE
screen is shown below.
ISE Mode option keys:
The General Options screen gives access to options that are not directly re-
lated to the measurement process (see chapter
4 General Options
for more
information).
Stores the current concentration reading (see section
7.4.2 Manual Logging)
.
or
Starts the ISE automatic log (see section
7.4.1 Automatic Logging
).
Enter the ISE calibration screen (see section
7.3.3 ISE Calibration
).
Enter the ISE setup screen. Parameters are associated with ISE measurements
and calibration.
Allows the user to switch between the available measurement modes: Titrator,
pH, mV and ISE mode.
To Next Page
Loading...
