9-3
MAINTENANCE, PERIPHERALS
9 MAINTENANCE, PERIPHERALS
The 25 mL burette included with the titrator exceeds the ISO 8655 standard for accurate
delivery of liquids by a motor-driven piston burette.
9.1 Burette Maintenance
9.1.1 Burette Assembly
The burette is delivered with a 25 mL syringe inside and with all of the accessories mounted
(see section
2.1 Unpacking
for burette assembly details). The burette assembly consists of a
rigid housing which holds the glass syringe, a 3/2-way value, and titrant tubing.
9.1.2 Changing the Burette
Remove the burette from the pump assembly by sliding it forward and then slide the new
burette into place (see the picture below).
To Next Page
Loading...
Need help?
General
