4-4
GENERAL OPTIONS
4.1.1 Temperature Source
Select the temperature source used for temperature compensation.
When
Automatic Temperature Compensation
is selected “ATC” is displayed on the main screen
and the temperature is read by the temperature probe.
When
Manual Temperature
is selected “Manual” is displayed on the main screen and a preset
temperature value is used for temperature compensation.
Note: The selected temperature source will be indicated in the report files, A for Automatic
and M for Manual.
4.1.2 Manual Temperature Setting
If the temperature probe is not connected, the user can manually set the temperature used
by the titrator for compensation. This can be done when the
Manual Temperature
option is
selected (see Section
4.1.1 Temperature Source
).
The temperature value can be set between –5 and 105 ºC.
To Next Page
Loading...
Need help?
General
