5-38
METHODS
The sample size used in the calculations:
Analyte size to be diluted * Aliquot Volume
Final Dilution Volume
5.5.15 Titrant Name
Enter the name of the titrant (up to 24 characters). This name will appear in the titration
report.
5.5.16 Titrant Concentration
Enter the concentration of the titrant to be used. When determining the titrant concentration
only the concentration unit is displayed. The titrant concentration can not be set.
5.5.17 Analyte Size
Enter the size of the sample (for sample concentration determinations) or standard (for
titrant concentration determination).
5.5.18 Analyte Entry
Select the analyte entry mode.
To Next Page
Loading...
Need help?
General
