8-9
AUXILIARY FUNCTIONS
Sample Name
Allows the sample name to be recorded in each report. The sample
name will increase by one, with each new titration or logging report,
if the last character is a number.
Company Name
Allows the company name to be recorded in each report.
Operator Name
Allows the operator name to be recorded in each report.
Electrode Name
Allows the electrode name to be recorded in each report.
Fields 1, 2, 3
Allows any additional information to be recorded in each report.
The fields must be selected from
Setup Titration Report
screen (see section
8.3.6 Setup
pH/mV/ISE
and section
8.3.7 Setup Titration Report
) in order to be displayed in the titration
report.
8.3.4 Instrumentation Data
Displays titrator configuration data.
Titrator Serial Number: The serial number of the titrator base board.
Analog Board 1 (and/or 2) Serial Number: The serial number of the analog board.
Pump 1 (and/or 2) Serial Number: The serial number of the connected pump.
Titrator Software Version: The current software version installed on the titrator.
Base Board Software Version: The current software version present on the base board
of the titrator.
Pump 1 (and/or 2) Software Version: The current software version for the pump.
Analog 1 (and/or 2) Calibration Date: Manufacturer calibration date of the analog board.
Note: If more than 1 year elapsed from the calibration date of the analog board 1 and/
or 2, the message
Analog 1 Calibration Due
and/or
Analog 2 Calibration
Due
will appear on the main screen. The analog board(s) need to be recalibrated.
To Next Page
Loading...
Need help?
General
