5-10
METHODS
The
Linear Dosing
option is recommended for titrations with a slower reaction rate, difficult
nonaqueous titrations, and specific applications.
Note: For steep and normal titration curves, smaller volume increments are recommended, to
obtain many measured points around the equivalence point.
For flat titration curves, larger volume increments are recommended for equivalence
point detection.
5.5.5 Dosing Type
The Titrator has two dosing types:
Linear Dosing
and
Dynamic Dosing
.
5.5.5.1 Linear Dosing
Linear dosing dispenses a pre-defined volume of titrant with every addition (see graph).
To Next Page
Loading...
