5-25
METHODS
5.5.11 Electrode Type
Enter the type of the electrode, up to 24 characters. The electrode type will appear in the
titration report.
5.5.12 Blank Option
This feature allows the user to select the procedure for the blank calculations (where
V
is the
volume of titrant dispensed during the titration and
Blank
is the volume of titrant consumed
by the blank sample).
If one of the options (
V-Blank
or
Blank-V
) is selected in the
View / Modify Method
screen, the
Blank Value
will be active on the View/Modify Method screen and the value of the
blank can be set (in liters).
To Next Page
Loading...
Need help?
General
