4-13
GENERAL OPTIONS
4.13 Printer Mode
This screen allows the users to select the printing mode: Ansi (default), Ascii and Text mode.
Ansi mode:
Use this mode when your printer is set as Ansi. In this case all the accented characters / symbols
available in titrator will be printed on your printer.
Ascii mode:
Use this mode when your printer is set as Ascii. In this case only some of the accented
characters / symbols available in titrator will be printed on your printer.
Text mode:
Use this mode when you don’t need to print the accented characters.
4.14 Reset to Default Settings
This option restores the manufacturer settings.
Note: Please be careful !!! This will also delete all the user created methods and restore all manufac-
turer settings such as titrator configuration, standard method parameters, etc.
To Next Page
Loading...
