5-43
METHODS
5.6 Printing
To print method parameters, press from the main screen.
Press and wait a few seconds until the printer completes the job.
If no printer is connected to the dedicated socket, or if the printer is offline, an error message
will appear on the display (see
9.3.3 Connecting a Printer
section,
for information about
connecting a printer to the titrator).
5.5.26 Linked Method
This option allows the user to link two titration methods. If
No Link
is selected only the
current method will run. If a method is selected it will run after the current method. See
Appendix 4 for additional information.
To Next Page
Loading...
