8-10
AUXILIARY FUNCTIONS
8.3.5 Logging Interval – pH/mV/ISE
Allows the user to setup a time interval for auto-logging while in pH, mV, or ISE mode (see
section
7.3 Logging
).
8.3.6 Setup pH/mV/ISE Report
Customize a unique report to record the pH, mV, and ISE measurements. An asterisk means
that it will be included in the report.
8.3.7 Setup Titration Report
Customize a unique report to record the titration results. An asterisk means that it will be
included in the titration report.
To Next Page
Loading...
