5-28
METHODS
A formula example is shown below using M (mol/L) as the titrant unit and g/kg as the final
result unit:
Variables can be set according to the amount of sample and titrant used.
5.5.13.4 Sample Calculations by Volume
This calculation is used when the concentration of an analyte is determined in terms of the
volume of sample. The results are based on the initial sample volume (in milliliters). When
choosing the formula, select the
Titrant Unit
first and then the
Final Sample Unit
.
The titrator will calculate the results based on the selected units.
Titrant Units:
M (mol/L) moles/liter
N (eq/L) equivalents/liter
g/L grams/liter
mg/L milligrams/liter
To Next Page
Loading...
