5-42
METHODS
5.5.24 Signal Averaging
This option enables filtering on the mV/pH reading.
If
1 Reading
is selected, the filtering is disabled. The titrator will take the last reading and place
it into a “moving window” along with the last 2, 3 or 4 readings (depending on the selected
option). The average of those readings is displayed and used for calculations.
Averaging more readings is helpful when a noisy signal is received from the electrode.
5.5.25 Final Result Format
This option allows you to set the format for displaying the final titration result.
To Next Page
Loading...
