5-30
METHODS
5.5.13.5 Standardize Titrant by Weight
This calculation is used when the concentration of the titrant is determined using a
solid standard. Determination of the titrant concentration is based on the primary standard
weight (in grams).
The calculation is based on the selected titrant unit. If the titrant unit is M (mol/L), the
formula used to calculate the result is displayed below:
5.5.13.6 Standardize Titrant by Volume
This calculation is used when the concentration of the titrant is determined using a primary
standard solution. Determination of the titrant concentration is based on the primary standard
volume (in milliliters).
The titrator will perform the calculation based on the titrant unit selected.
The calculation is based on the selected titrant unit. If the titrant unit is N (eq/L) the formula
used to calculate the result is displayed below:
5.5.13.7 Generic Formula
The user can define their own calculation formula based on the final result units in a
solid or liquid sample.
To Next Page
Loading...
Need help?
General
