5-37
METHODS
When all the variables are set, press to proceed with the “Calculating Sample
Concentration” formula:
5.5.13.8.3 Generic Formula
This option allows the user to define their calculation formula for the “Direct Titration Volume”,
“Calculating Excess Volume of Titrant 1” and “Final Sample Concentration” in a solid or liquid
sample.
5.5.14 Dilution Option
When the initial sample is diluted, a titration is made with an aliquot of the diluted sample,
dilution calculations can be used.
The calculations are based on the original sample weight (volume) in order to express the
results for the initial sample.
Final Dilution Volume:
The volume of the sample after dilution
Aliquot Volume:
Sample volume used for the titration
Analyte size to be diluted:
The initial sample weight (volume)
To Next Page
Loading...
Need help?
General
