Hanna Instruments HI 902 Color - Attaching Stirrer

2-7
SETUP
2.3.4.2 Attaching Stirrer
To attach the stirrer to the titrator, follow these steps:
• Attach the propeller (B) to the stirrer (A) by pressing it onto the stirrer shaft.
• Insert the electrode (C) and temperature sensor (D) into the dedicated holes on the
stirrer. Push them in until they are in a stable position.
• Slide the stirrer on the stirrer support and set the height by tightening the screw
located on the positioning collar (E).
sale@ponpe.com
www.ponpe.com