A1-4
APPENDIX 1
Potentiometric Titrations: Acid-Base (pH or mV-Mode), Redox, Precipitation,
Complexometric, Non-Aqueous, Ion-Selective, Argentometric.
Titer Determination.
Fixed mV or pH End Point Detection.
Single Equivalence Point Detection, with the 1
st
or 2
nd
Derivatives of the titration curve.
Multiple Equivalence Point Detection
Flexible Concentration Calculations, with many concentration units.
Graph Display during titration, graphs of the stored titration data (mV-Volume or pH-
Volume titration curve, 1
st
derivative curve or 2
nd
derivative curve, in pH-mode or mV-
mode) and pH/mV values versus time-data logging results.
Data Storage: up to 100 complete titration report and pH/mV/ISE reports.
Files Copied to and Restored from USB Storage Device: Standard Methods, User
Methods, Titration and pH/mV/ISE Logging Reports, and Bitmap Files can be transferred to
a PC using a USB storage device.
Peripheral Units:
External VGA Display
External PC Keyboard
Printer
PC via USB Interface
GLP Conformity: Good Laboratory Practice and Instrumentation Data storage and printing
capabilities.
Mains: 110/220 Vac ; 50-60 Hz
Power Draw: 1.3 Amps
2 Exchangeable Fuses
Enclosure Material: ABS plastic and Steel
Keypad: Polycarbonate
Dimensions: Width x Depth x Height = 390 x 350 x 380 mm
Weight: approx. 22 lbs. (10 Kg) (with 1 pump, stirrer and sensors)
Operating Environment: 10 to 40 °C, up to 95% relative humidity
Storage Environment: -20 to 70 °C, up to 95% relative humidity
To Next Page
Loading...
