P
REFACE OPERATING INSTRUCTIONS HERMA 400
2/154 3.28 US (130519)
Preface
Read and understand all parts of these operating instructions before unpacking,
installing or operating on the applicator.
They contain important instructions for ens
uring your personal safety. These
operating instructions must have been read and understood by all persons carrying
out work on this applicator in any production phase.
Especially important are sections 2, „General information“, where you can find information on all
types of safety messages and their meaning, and section 3, „Safety“, which gives you details on
your personal safety and the responsibility of
the various users of this Product.
Inform yourself about the applicable accident prevention
regulations at the location and the
general safety regulations.
Keep these instructions and all accompanying docu
ments (the „documentation“) , for example
the wiring diagram, in a safe location for future reference.
These operating instructions are an
integral part of the machine. They must be made available at
the place of operation throughout the entire service life of the applicator.
Failure to do so could result in serious injury or death o
r property damage.
Please note that You as an operator of the machine bear the risk and the liability in the following
cases:
> non-complinace with these instructions
> unintended use
> the use of untrained personnel
> connection to any unapproved electrical system
> the use of unapproved replacement parts
> the repair and replacement of the Product(s) or any part thereto due to normal wear and tear,
v
andalism, accidents, negligence, or otherwise without any fault of the manufacturer
> repairs, alterations or adjustments to the Product(s) perform
ed or originated by the Purchaser or
any third party without manufacturerer's prior written consent
> unsuitable raw or working materials
> unreasonable use
> misuse
> abuse
> accident
> alteration
> lack of maintainance
> use after the Product is significantly worn
> and other similar cases