Operating instructions
HERMA 400 APPLICABILITY
b
3.28 US (130519) 3/154
Applicability
These operating instructions apply to the following system:
Label applicator: Type
HERMA 400 (the „Product“)
Year of construction: Specified on the type label (also on the cover sheet)
Manufacturer: HERMA GmbH
Geschäftsbereich Maschinen
70791 Filderstadt, Germany
Telephone: +49 (0)711 / 7702 0
Fax: +49 (0)711 / 7702 700
www.herma.com
Technical service: Tel.: +49 (0)711 7702 551 / +49 (0)711 7702 777
Fax: +49 (0)711 7702 786
service-machines@herma.com
service-maschinen@herma.com
https://machines.herma.com
Issue date: May 13, 2019
Version: 3.28 US (130519)
The documentation must be passed on to the new owner if the machine is sold.
Find an overview of the HERMA 400 applicator and its function in chapter 1 on page 12.
Copyright
© Copyright 2019, HERMA GmbH.
The information included in these operating instructions and/or in all of the sections, sub-sections and
chapters of them is the intellectual property of the manufacturer and is subject to domestic and
international copyright law and other laws for protecting intellectual property.
The information provided here is used to operate, maintain and correct faults for the units described
here.
Except for internal use no part of this documentation may be reproduced or processed, copied, or
distributed with the help of electronic systems in any form without prior written permission of
HERMA
GmbH.
To Next Page
Loading...
