Herma 400 - Page 45

4
Operating instructions HERMA 400 A
PPLICATOR DESCRIPTION
3.28 US (130519) 45/154
Technical Data
Operating voltage: 15 – 30V DC
Rated current consumption:
 25mA
Output current: max. 20mA
Output voltage low/high:
 2.5V /  UB - 3.5V
Temperature (operation/storage): 0 – 50°C / -20 – +80°C
Type of protection: IP20
Protection class: III
Protective circuit: Short-circuit protection, inverse-polarity protection
Label material, minimum requirements
Labeling speed Width of the gap
The gap between the labels must have the following dimensions, depending on the labeling speed:
Declaration of Conformity
HERMA GmbH
Geschäftsbereich Maschinen
D-70791 Filderstadt
Germany
We hereby declare that the label sensor FS03 is developed, designed, and manufactured by us in our
sole responsibility in compliance with the following directives.
EC EMC Directive 2014/30/EU 
IEC 60947-5-2:2007 (Low-voltage switchgear and controlgear, Control circuit devices and switching
elements - Proximity switches)
16.01.2019

Managing director
 ~1.600“/min (40 m/min)
~0.08“ (2 mm)
 ~1.600“/min,  ~4.700“/min
min. ~0.1“ (2,5 mm)
 ~4.700“/min (120 m/min)
min. ~0.12“ (3,0 mm)