Device Security > Management Access > Server
Device Security
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
103
Buttons
SNMPv3 enabled Activates/deactivates the access to the device with SNMP version 3.
Possible values:
marked
(default setting)
Access is activated.
unmarked
Access is deactivated.
Use this function, for example, for the Industrial HiVision network
management software to make changes to the settings.
UDP Port Specifies the number of the UDP port on which the SNMP agent receives
requests from clients.
Possible values:
1..65535
(default setting
161
)
Exception: Port
2222
is reserved for internal functions.
To enable the SNMP agent to use the new port after a change, you
proceed as follows:
Click the "Set" button.
Select in the
Basic Settings > Load/Save
dialog the active
configuration profile and click the "Save" button.
Restart the device.
Button Meaning
Set Transfers the changes to the volatile memory (
RAM
) of the device and
applies them to the device. To save the changes in the non-volatile
memory, proceed as follows:
Open the
Basic Settings > Load/Save
dialog.
In the table, highlight the desired configuration profile.
If in the "Selected" column the checkbox is
unmarked
, click the
"Select" button.
Click the "Save" button.
Reload Updates the fields with the values that are saved in the volatile memory
(
RAM
) of the device.
Help Opens the online help.
Parameters Meaning
To Next Page
Loading...