Routing > NAT > 1:1 NAT > Rule
Routing
382
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
Routing > NAT > 1:1 NAT > Rule
8.31 Rule
In this dialog, you generate and edit the NAT rules and assign router
interfaces to which the device applies the NAT rules.
Table
Parameters Meaning
Index Displays a sequential number to which the table entry relates.
The device automatically assigns this number.
Possible values:
1..255
Rule Name Displays the name of the NAT rule. To change the name, click the relevant
field.
Possible values:
alphanumeric ASCII character string with 0..32 characters
Priority Specifies the priority of the NAT rule.
Using the priority, you specify the order in which the device applies several
rules to the data stream. The device applies the rules in ascending order
starting with priority 1.
Possible values:
1..6500
(default setting:
1
)
Ingress Interface Assigns the NAT rule to the router interface on which the device receives
data packets. The NAT rule makes the destination device virtually
accessible in the network connected here.
Possible values:
<Interface number>
The device applies the NAT rule to this router interface, and the NAT
rule is applied exclusively to data packets addressed to the IP address
specified in the "Destination Address" field.
no Port
No router interface is assigned to the NAT rule. Someone removed the
router interface after the last edit of the NAT rule.
You enable on the ARP proxy function on this router interface in the
Routing > Interfaces > Configuration
dialog.
To Next Page
Loading...