Hirschmann HiSecOS EAGLE30 - Global

Diagnostics > Status Configuration > Device Status
Diagnostics
420
RM GUI HiSecOS EAGLE20/30
Release 3.0 09/2015
9.2.1 Global
 Device status
 Trap Configuration
Parameters Meaning
Device status Displays the current status of the device. The device determines the status
from the individual monitored parameters.
Possible values:
 "Error"
The device displays this value to indicate a detected error in one of the
monitored parameters.
 "Ok"
Parameters Meaning
Generate Trap Activates/deactivates sending an SNMP trap when the device detects
changes in the monitored functions.
Possible values:
 marked
The device sends an SNMP trap when the device detects a change in
the monitored functions..
 unmarked (default setting)
The sending of SNMP traps is deactivated.
The prerequisite for sending SNMP traps is that you enable the function in
the
Diagnostics > Status Configuration > Alarms (Traps) dialog and
specify at least 1 SNMP manager.