Network Security > RADIUS > Global
Network Security
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
173
Network Security > RADIUS > Global
4.12 RADIUS Global
This dialog allows you to specify basic settings for RADIUS.
RADIUS Configuration
Parameters Meaning
Max. Number of
Retransmits
Specifies how often the device retransmits an unanswered request to the
authentication server before the device sends the request to an alternative
authentication server.
Possible values:
1..15
(default setting:
4
)
Timeout [s] Specifies how many seconds the device waits for a response after a
request to an authentication server before it retransmits the request.
Possible values:
1..30
(default setting:
5
)
NAS IP-Address
(Attribute 4)
Specifies the IP address that the device transfers to the authentication
server as attribute 4. Enter the IP address of the device or another
available address.
Possible values:
Valid IPv4 address (default setting:
0.0.0.0
)
In many cases, there is a firewall between the device and the
authentication server. In the Network Address Translation (NAT) in the
firewall changes the original IP address, and the authentication server
receives the translated IP address of the device.
The device transfers the IP address in this field unchanged across the
Network Address Translation (NAT).
To Next Page
Loading...