Hirschmann HiSecOS EAGLE30 - Basic Settings

Time > Basic Settings
Time
68
RM GUI HiSecOS EAGLE20/30
Release 3.0 09/2015
Time > Basic Settings
2.1 Basic Settings
With this dialog you can specify time-related settings independently of the
time synchronization protocol specified.
 Configuration
Parameters Meaning
System Time (UTC) Displays the current date and time with reference to Universal Time
Coordinated (UTC).
System Time Displays the current date and time with reference to the local time:
"System Time" = "System Time (UTC)" + "Local Offset [min]" + "Daylight
Saving Time"
Set Time from PC The device uses the time on the PC as the system time.
Time Source Displays the time source from which the device gets the time information.
The device automatically selects the available time source with the
greatest accuracy.
Possible values:
 local
System clock of the device.
 sntp
The SNTP client is activated and the device is synchronized by an
SNTP server.
 ptp
PTP is activated and the clock of the device is synchronized with a
PTP master clock.
Local Offset [min] Specifies the difference between the local time and "System Time (UTC)"
in minutes: "Local Offset [min]" = "System Time" − "System Time (UTC)"
Possible values:
 -780..840 (default setting 60 )
Set Offset from PC The device determines the time zone on your PC and uses it to calculate
the difference between the local time and "System Time (UTC)".