Time > NTP > Server
Time
74
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
Time > NTP > Server
2.4 Server
In this dialog you specify the NTP servers.
The NTP client of the device obtains the time information from the unicast
responses of the servers specified here.
If the NTP server of the device is working in
symmetric
mode, you specify
the servers participating in the cluster here.
Table
Parameters Meaning
Index Displays a sequential number to which the table entry relates.
Possible values:
1..4
The device automatically assigns this number.
When you delete a table entry, this leaves a gap in the numbering. When
you create a new table entry, the device fills the first gap.
Address Specifies the IP address of the NTP server.
Possible values:
Valid IPv4 address (default setting:
0.0.0.0
)
Port Specifies the UDP Port on which the NTP server provides the time
information.
Possible values:
1..65535
(default setting:
123
)
Exception: Port
2222
is reserved for internal functions.
To Next Page
Loading...