Diagnostics > Status Configuration > Signal Contact
Diagnostics
434
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
Diagnostics > Status Configuration > Signal Contact
9.4 Signal Contact
The signal contact is a potential-free relay contact. The device thus allows
you to perform remote diagnosis. The device uses the relay contact to signal
the occurrence of events by opening the relay contact and interrupting the
closed circuit.
Note: The device can contain several signal contacts. Each contact contains
the same monitoring functions. Several contacts allow you to group various
functions together providing flexibility in system monitoring.
The menu contains the following dialogs:
Signal Contact 1 / Signal Contact 2
To Next Page
Loading...