Hirschmann HiSecOS EAGLE30 - LDAP Configuration

Device Security > LDAP > Configuration
Device Security
90
RM GUI HiSecOS EAGLE20/30
Release 3.0 09/2015
Device Security > LDAP > Configuration
3.4 LDAP Configuration
This dialog allows you to specify up to 4 authentication servers. An
authentication server authenticates and authorizes the users when the
device forwards the log on data to the server.
The device sends the log on data to the first authentication server. If no
response comes from this server, the device contacts the next server in the
table.
 Operation
Parameters Meaning
Operation Enables/disables the "LDAP" client.
The device uses the "LDAP" client, if in the
Device Security >
Authentication List dialog you specify the value ldap in 1 of the rows
"Policy 1" to "Policy 5". Prior to this, specify in the
Device Security >
LDAP > Role Mapping dialog at least 1 Mapping for this role
administrator . This provides you access to the device as administrator
after logging on through LDAP.
Possible values:
 "On"
The "LDAP" client is enabled.
 "Off" (default setting)
The "LDAP" client is disabled.