Routing > Routing Table
Routing
346
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
Routing > Routing Table
8.18 Routing Table
This dialog displays the routing table with the routes configured in the device.
Using the routing table, the device determines the router interface through
which it transfers IP packets that are addressed to recipients in a different
network.
Configuration
Table
Parameters Meaning
Preference Specifies the preference number that the device assigns by default to the
newly configured, static routes.
Possible values:
1..255
(default setting:
1
)
Routes with a value of
255
will be ignored by the device in the routing
decision.
Parameters Meaning
Port Displays the router interface through which the device is currently
transmitting IP packets addressed to the destination network.
Possible values:
<Router interface>
The device uses this router interface to transfer IP packets addressed
to the destination network.
no port
The static route is currently not assigned to a router interface.
Network Address Displays the address of the destination network.
Netmask Displays the network mask.
Next Hop IP
Address
Displays the IP address of the next router on the path to the destination
network.
To Next Page
Loading...