Hirschmann HiSecOS EAGLE30 - Software Update

Basic Settings > Software
Basic Settings
40
RM GUI HiSecOS EAGLE20/30
Release 3.0 09/2015
 Software Update
Alternatively, the device allows you to update the device software by right-
clicking in the table if the image file is located in the external memory.
Parameters Meaning
File Specifies the path and the file name of the image file with which you
update the device software.
The device gives you the following options for updating the device
software:
 Software update from the PC
If the file is located on your PC or on a network drive, click the " … "
button and select the file there.
You also have the option of transferring the file from your PC to the
device through SFTP or SCP:
 On your PC, open an SFTP or SCP client, e.g. WinSCP.
 Use the SFTP or SCP client to open a connection to the device.
 Transfer the file to the directory
/upload/firmware on the device.
When the file transfer is complete, the device starts updating the
device software. If the update was successful, the device creates
an
/upload/firmware file in directory ok and deletes the image
file.
The device loads the device software during the next restart.
 Software update from an SCP or SFTP server
If the file is located on an SCP or SFTP server, enter the URL for the
file in one of the following forms:
–
scp:// or sftp://<IP address>/<path>/<file name>
When you click the "Update" button, the device displays the
"Authentication" window. There you enter "Username" and
"Password", to login to the server.
–
scp:// or sftp://<user>:<password>@<IP
address>/<path>/<file name>
… Displays the "Open" dialog. If the image file is located on your PC or on a
network drive, you select the image file here.
Update Updates the device software.
The device installs the selected file in the flash memory, replacing the
previously saved device software. Upon restart, the device loads the
installed device software.
The device copies the existing software into the backup memory.
To remain logged in to the device during the software update, move the
mouse pointer occasionally. Alternatively, specify a sufficiently high value
in the
Device Security > Management Access > Web dialog, field "Web
Interface Session Timeout [min]" before the software update.